How To Repair Failing Clear Coat - DIY Fix, No Repaint

Failing clear coat on your roof or hood? Here's how to repair it yourself with a real two-part clear coat, no body shop and no repaint. In this video we take a roof with badly failing, peeling clear coat and bring it back in one afternoon using the ReSolver & ReGloss system. A body shop quoted thousands for a repaint. This was about $300 in product and a Saturday in the driveway. 🔧 PRODUCTS NEEDED: ReSolver Precision Stripper: https://regloss.com/products/resolver-precision-clearcoat-stripper ReGloss CORE Kit: https://regloss.com/kit Note: ReSolver is NOT included in the kit ReSolver helps quickly remove the failing, peeling clear coat and allows for proper prep of the panel. ReGloss is a true 2K clear coat, applied by hand following the ReGloss system. This is a straight forward, real result and we show the step-by-step process so you can see what we do. This is a clear coat repair, not a paint job. It won't look like it came off the lot. It will take a car you avoid looking at and make it one you're glad to drive again, and it's a long-term solution, not a wax that's gone in a month. Works on most cars, trucks and SUVs. If the damage has gone through to the color or bare metal, or has rust, this isn't the right fix and we'll tell you that too. Not sure if ReGloss will work on your car? Send us a photo of the panel before you buy and we'll tell you straight: [email protected] ⏱ CHAPTERS 0:00 – Intro 1:31 – ReSolver Basic Info 3:00 – Using ReSolver 7:04 – ReSolver Results & ReGloss Steps 9:50 – The End Result #clearcoatrepair #paintrestoration #peelingclearcoat